top of page
TVI/AHD to HDMI, VGA, CVBS Converter

TVI/AHD to HDMI, VGA, CVBS Converter

Cable your TVI or AHD wildlife camera to virtually any TV or monitor and receive full 720 /1080p HD image quality.

 

If you want to connect your HD wildlife camera straight to a TV (HDMI) or monitor (VGA) without using a DVR CCTV recorder, then this ScatterBox TVI/AHD converter will do the job very well.

 

Connecting your AHD camera to a TV directly without this HDMI converter means it would have to be set to analogue mode resulting in a loss of HD picture quality. By using the inline ScatterBox TVI/AHD converter your camera can be set to high definition 720p or 1080p without any loss of HD image quality.  We think this is an absolute must for a standard DIY install where you want the best quality camera image cabled straight to your TV or monitor screen.

 

  • TVI/AHD input is converted and split into HDMI, VGA or CVBS switchable outputs.
  • Converter can be used on cable runs up to 300m long and there’s also a TVI/AHD loop through; with a built-in repeater to boost and send the signal another 300m.
  • The CVBS output provides a simple way of integrating new equipment into older systems. For more modern systems both the VGA and HDMI outputs support 1080p.
  • The compact unit can be wall mounted (brackets and screws included) for a professional installation next to the monitor or recording equipment.
  • This unit is supplied with a 3 pin mains power supply 5V DC PSU

 

ScatterBox TVI / AHD Converter Specification

  • Inputs: 1x BNC - TVI / AHD 
  • Outputs: 1x BNC - CVBS. 1x HDMI, 1x VGA 
  • Power: 5 volt DC (plug supplied)
  • Dimensions: 121mm x 94.2mm x 31mm
    £110.00Price
    Sales Tax Included
    bottom of page