top of page

Peersonic

We're the sole exporter of Peersonic equipment to EU countries.

Not available to order for UK delivery!

Peersonic RPA3

With 100% Satisfaction Guarantee and Lifetime Backup & Support

 

The Peersonic bat recorders are all based upon the same recording circuit board, and identical operating functions are available on the handheld RPA equipment as on the weatherproof static equipment so it's very easy to move from one device to the other as your needs change. All Peersonic handheld equipment is furnished with a tripod thread.

The RPA handheld offering can also be used for static based surveys where a 2-night deployment time is adequate.

Price excludes VAT and includes shipping to EU countries only.

Not available to order for UK delivery!

Peersonic Weatherproof Kit

With 100% Satisfaction Guarantee and Lifetime Backup & Support

 

Includes:

Weatherproof enclosure with battery management board;

RPA3 recorder (integral circuit board only);

Remote mic and 3m cable.

 

Complete kit. Using Switchcraft connectors.

Price excludes VAT and includes shipping to EU countries only.

Not available to order for UK delivery!

Peersonic BatWav Ultrasound Player

With 100% Satisfaction Guarantee and Lifetime Backup & Support

 

The BatWav, as suggested by its name, will play back WAV file full spectrum recordings of bats or anything ultrasound at a sample rate of 384ksamples/second.

 

It may be powered by a laptop type power supply for office use when training students on recognition of bat calls. Social calls through to high frequency navigation calls may be played back using the tripod mounted speaker. In this case a rechargeable battery pack may be used.

Currently in use for bat detector training and as a lure it has been proven to be efficient and effective.

The speaker supports replay up to 100kHz which covers UK species as far as Greater Horseshoe.

Price excludes VAT and includes shipping to EU countries only.

Not available to order for UK delivery!

Peersonic Microphone Tester

With 100% Satisfaction Guarantee and Lifetime Backup & Support

 

Ultrasonic microphones as used in detectors and recording equipment have various failure modes depending upon the type of microphone and the amount of use outdoors.
MEMS Electric microphones are very popular now, but they will degrade with exposure to moisture. Drying out can recover performance after an excessive saturation, however, the higher frequencies may not recover to the same extent as lower ultrasound (30-40kHz).

Because of this, it makes sense to test your equipment prior to a session of use, especially if it is to be left out in various conditions.​

Rather than test the microphone with a spot frequency, the Peersonic mic tester offers the following.

  • Tests at 4 fixed frequencies with a simulated sine wave.

  • Runs a series of patterns that test at different rates over the spectrum in steps from 15kHz to 125kHz.

Price excludes VAT and includes shipping to EU countries only.

Not available to order for UK delivery!

bottom of page